Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door panel of the Ford Escape

Model: Ford Escape MK 2 - Years 2008-2012
Part: Door trim panel

Today we will discover the instructions that will allow us to disassemble and remove the rear door panel of the Ford Escape. First, we open the rear door of the car and start by removing the handle cover; then we unscrew the screw found inside it, also located on the opening handle, as shown in the video. At this point, we unscrew the screws on the sides of the panel and disconnect the electrical connector of the window button, levering on the sides of the panel to detach and remove it; finally, we disconnect the handle cable located on the back!

Posted on 18 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Rear Hatch of the Ford Escape
How to Remove and Replace the Rear Hatch of the Ford Escape
Ford Escape (2001-2007 / MK 1) Today's guide shows you the main steps to remove and replace the rear hatch of the Ford Escape. First, open the trunk hatch and start by removing the…
How to Remove the Rear Hatch Panel on a Ford Escape
How to Remove the Rear Hatch Panel on a Ford Escape
Ford Escape (2013-2019 / MK 3) Today, you will learn how to remove and replace the rear hatch panel on a Ford Escape. First, open the trunk and start removing the plastic trim piec…
How to open the rear hatch of the Ford Escape from the inside.
How to open the rear hatch of the Ford Escape from the inside.
Ford Escape (2013-2019 / MK 3) In this guide, we will see the instructions that will allow us to open the rear hatch of the Ford Escape from the inside, thus unlocking the closure.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos