Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Door trim panel

Today we will see the instructions that will allow us to disassemble and remove the front door panel of the Ford Escape, as well as the Kuga. First, we open the front door of the car and start removing the handle cover and the window switch panel, levering on the sides and disconnecting the electrical wiring underneath; then we unscrew all the fixing screws of the door panel, in order to detach and remove it, as shown in the video. At this point, we make any necessary repairs, finally reassembling the door trim!

Posted on 9 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Ford Escape
How to disassemble the front door panel of the Ford Escape
Ford Escape (2008-2012 / MK 2) In this guide we will see the instructions that will allow us to disassemble the front door panel of the Ford Escape, in simple steps. First, we open…
How to Replace the Driver's Window Regulator in a Ford Escape?
How to Replace the Driver's Window Regulator in a Ford Escape?
Ford Escape (2008-2012 / MK 2) In this tutorial, you will see how to replace the driver's window regulator mechanism in a Ford Escape. This is a simple task but requires good manua…
How to Replace the Lock in the Ford Escape?
How to Replace the Lock in the Ford Escape?
Ford Escape (2013-2019 / MK 3) In this tutorial, see how to replace the lock in the Ford Escape, a very simple and quick operation. First, open the door in question, then using a f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos