Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Window switch

See other generations:
Video tutorial

Here are the instructions to remove and replace the window switches on a Ford Focus, following these simple steps. First, open the front door and start prying on the side of the switch panel using a thin, pointed tool.

Then disconnect the electrical connector located underneath, as shown in the video. At this point, remove and replace the damaged switch, or if necessary, replace the entire window switch panel.

Reverse the procedure for reassembling the switch panel!


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Recalibrate the Window Regulator Motor on a Ford Focus
How to Recalibrate the Window Regulator Motor on a Ford Focus
Ford Focus (2018-2025 / MK 4) This guide provides instructions on how to reset and recalibrate the window regulator motors on a Ford Focus. First, get inside the vehicle and turn …
Replacement of the power window motor for the Ford Focus
Replacement of the power window motor for the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will discover the instructions that will allow us to disassemble and replace the window motor of the Ford Focus. First, we open the front do…
How to replace the front window switch of the Ford Focus
How to replace the front window switch of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Discover in this guide how to remove and replace the window switch of the Ford Focus in simple and quick steps. First, open the front door and start …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos