Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the power window motor for the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Power window motor

Today we will discover the instructions that will allow us to disassemble and replace the window motor of the Ford Focus. First, we open the front door of the car and start disassembling and removing the door panel, removing the plastic cover and the window switch panel (disconnecting the electrical connector underneath); then we unscrew the screws of the panel and lever on the sides to detach and remove it, as shown in the video. At this point, we proceed with the disassembly of the window motor, unscrewing the screws of the side window and the mechanism; disconnect the wiring of the motor to remove it and replace it with the new one!

Posted on 29 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Window Regulator Motor on a Ford Focus
Replacing the Window Regulator Motor on a Ford Focus
Ford Focus (1998-2004 / MK 1) Need to remove the window regulator motor from inside the door? Here’s how to remove the window regulator motor from a Ford Focus. Unscrew the screws…
How to Install the Rear Window Regulator Mechanism in a Ford Focus?
How to Install the Rear Window Regulator Mechanism in a Ford Focus?
Ford Focus (1998-2004 / MK 1) In this tutorial, you will see how to install the electric window regulator mechanism in the rear door of the Ford Focus, a very simple operation. Be…
How to replace the front window switch of the Ford Focus
How to replace the front window switch of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Discover in this guide how to remove and replace the window switch of the Ford Focus in simple and quick steps. First, open the front door and start …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos