Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Rear Window Regulator Mechanism in a Ford Focus?

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Side window

See other generations:
Video tutorial

In this tutorial, you will see how to install the electric window regulator mechanism in the rear door of the Ford Focus, a very simple operation. Before proceeding, ensure that you have removed the inner door panel and positioned the glass at its highest point.

Once done, locate the two fixing holes indicated by a red border, then insert the mechanism inside the door, align it with the holes, and fully tighten the two nuts. Next, lower the glass, attach it to the respective pins, and connect the motor connector.

After testing everything, refit the door panel.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Side Glass of a Ford Focus
How to Remove the Front Door Side Glass of a Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will see the instructions that will allow us to dismantle and replace the front door side glass of the Ford Focus. First, open the front doo…
How to Repair the Rear Window Regulator on a Ford Focus
How to Repair the Rear Window Regulator on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) A common fault not only in Ford vehicles is the breakage of the plastic sliding pads in the window regulator mechanism: in this case, you can either …
Replacement of the power window motor for the Ford Focus
Replacement of the power window motor for the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will discover the instructions that will allow us to disassemble and replace the window motor of the Ford Focus. First, we open the front do…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos