Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Regulator Motor on a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Power window motor

Need to remove the window regulator motor from inside the door? Here’s how to remove the window regulator motor from a Ford Focus. Unscrew the screws on the trim panel using a screwdriver, then detach the internal opening handle and all screws. Remove the panel and disconnect the electrical cables. Once the panel is off, remove the window regulator motor. Unscrew the securing screws around the motor from the inside of the door. Fit the new window regulator motor and screw in the securing screws. Reattach the door cover panel after replacement.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Window Regulator Motor on a Ford Focus MK1
How to Dismantle the Window Regulator Motor on a Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In today's tutorial video, you will learn how to dismantle and replace the electric window regulator motor on the first series Ford Focus in simple s…
Guide to replacing the starter motor of the Ford Focus 2.0L
Guide to replacing the starter motor of the Ford Focus 2.0L
Ford Focus (2011-2018 / MK 3) Let's go through the main steps on how to disassemble and replace the starter motor of the Ford Focus 2.0L. First, we open the hood of the vehicle an…
Replacing the Starter Motor on a Ford Focus
Replacing the Starter Motor on a Ford Focus
Ford Focus (1998-2004 / MK 1) Replacing the starter motor on a Ford Focus? First, open the front bonnet and disconnect the battery terminals. Locate the starter motor in the engin…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos