Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Window Switches on Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Power window switch

Replace the window switch panel if damaged. Here’s how to remove it. Use a lever to detach the plastic covering of the handle. With a plastic or metal lever, pry between the button and the door handle. Remove the switch panel from the door panel, applying pressure to the two plastic clips on it, and disconnect the power cable. Fit the new switch panel into the Focus handle (connect the power connector). Connect the power connectors and cover the handle with the trim. Test the switch panel.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Switch Button on a Ford Focus
How to Replace the Window Switch Button on a Ford Focus
Ford Focus (2011-2018 / MK 3) To replace the window switch button on a Ford Focus, first remove the trim along the door handle, above which is the panel containing the button. Aft…
How to Replace the Window Switch on a Ford Focus
How to Replace the Window Switch on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today's guide shows how to remove and replace the window switch on a Ford Focus, following the instructions below. First, open the front door of your…
How to replace the front window switch of the Ford Focus
How to replace the front window switch of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Discover in this guide how to remove and replace the window switch of the Ford Focus in simple and quick steps. First, open the front door and start …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos