Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Speakers on Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Speaker

In this guide, you will learn how to remove the front speakers from a third-generation Ford Focus. First, open the front door and remove the door panel; use a T25 Torx screwdriver to remove the screws found on the panel: these are located on the sides and under the handle (which you will need to detach). At this point, remove the window switch panel by disconnecting the electrical connector, and start prying on the sides of the panel to pull it out; once done, unscrew the screws of the speaker and remove it, replacing it with the new one!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Speakers on the Ford Focus
How to Replace the Front Speakers on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this brief and simple guide, learn how to remove and replace the front speakers on the Ford Focus, following the instructions below. First, open t…
How to Remove Front Door Speakers on a Ford Focus
How to Remove Front Door Speakers on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This video will show you how to remove the speakers located in the front door of your Ford Focus. First, you need to remove the window regulator and …
Guide to replacing the front door speaker of the Ford Focus
Guide to replacing the front door speaker of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this guide we will see the instructions that will allow us to disassemble and replace the front door speaker of the Ford Focus. First, we open the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos