Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Speakers in a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Speaker

Today, follow the steps to remove and replace the speakers in your Ford Focus, as outlined below. First, open the front door and start removing the door panel; to do this, remove the various plastic covers and unscrew all the screws located on the panel, as shown in the video. At this point, pry at the sides to remove the door panel; then unscrew the speaker screws, disconnect the electrical connector to remove it, and replace it with the new one. Finally, reassemble the speaker and the door panel!

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove Front Door Speakers on a Ford Focus
How to Remove Front Door Speakers on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This video will show you how to remove the speakers located in the front door of your Ford Focus. First, you need to remove the window regulator and …
How to Replace the Front Speakers on the Ford Focus
How to Replace the Front Speakers on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this brief and simple guide, learn how to remove and replace the front speakers on the Ford Focus, following the instructions below. First, open t…
Replacing Front Speakers on Ford Focus
Replacing Front Speakers on Ford Focus
Ford Focus (2011-2018 / MK 3) In this guide, you will learn how to remove the front speakers from a third-generation Ford Focus. First, open the front door and remove the door pan…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos