Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front speaker of the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Speaker

In this guide, we will see the step-by-step instructions that will allow us to disassemble and replace the front door speaker of the Ford Focus. First of all, we open the front door of the car and start disassembling and removing the door panel; to do this, we remove the window switch panel and various plastic covers, disconnecting the electrical connector underneath and unscrewing all the fixing screws, as shown in the video. At this point, we unscrew the speaker screws and disconnect the electrical connector found on the back to remove it, replacing it with the new one!

Posted on 13 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the front door speaker of the Ford Focus
Guide to replacing the front door speaker of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this guide we will see the instructions that will allow us to disassemble and replace the front door speaker of the Ford Focus. First, we open the…
How to Remove the Speaker Housing from a Ford Focus Door
How to Remove the Speaker Housing from a Ford Focus Door
Ford Focus (2004-2011 / MK 2, Focus 2) Is the speaker mounted in the door damaged? Let's remove it from a Ford Focus. Use a screwdriver to unscrew the retaining screws located in the plast…
How to Change the Speakers in a Ford Focus
How to Change the Speakers in a Ford Focus
Ford Focus (2011-2018 / MK 3) Today, follow the steps to remove and replace the speakers in your Ford Focus, as outlined below. First, open the front door and start removing the d…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos