Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front door panel of the Ford Escape

Model: Ford Escape MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

In this short guide, we will see the process of disassembling the door panel of the Ford Escape, in simple and quick steps. First, we open the front door of the vehicle and start unscrewing all the fastening screws we find on the sides of the panel and on the door handle; then we pry on the sides of the panel to detach and remove it, disconnecting the opening handle cable and the electric connector of the window switch panel, as shown in the video.

We make any necessary repairs or replacements, finally reassembling the interior lining of the door!


Posted on 1 May 2025 by ScegliAuto


Related tutorials

How to disassemble the front door panel of the Ford Escape
How to disassemble the front door panel of the Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will see the instructions that will allow us to disassemble and remove the front door panel of the Ford Escape, as well as the Kuga. First, …
How to disassemble the front door panel of the Ford Escape
How to disassemble the front door panel of the Ford Escape
Ford Escape (2008-2012 / MK 2) In this guide we will see the instructions that will allow us to disassemble the front door panel of the Ford Escape, in simple steps. First, we open…
Removing the Front Door Panel on the Ford Escape
Removing the Front Door Panel on the Ford Escape
Ford Escape (2020-2026 / MK 4) In this brief guide, you will find step-by-step instructions to remove and replace the front door panel on the Ford Escape. First, open the front doo…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos