Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock in the Ford Escape?

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door lock

See other generations:
Video tutorial

In this tutorial, see how to replace the lock in the Ford Escape, a very simple and quick operation. First, open the door in question, then using a flathead screwdriver or a plastic spatula, remove the lock cover.

Next, also remove the plastic cap located on the inner edge of the door, loosen the bolt accessible through the hole with a Torx wrench, and pull the lock cylinder towards you. At this point, just insert the replacement and follow the reverse procedure.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

Replacing the Front Door Lock Actuator on the Ford Escape
Replacing the Front Door Lock Actuator on the Ford Escape
Ford Escape (2001-2007 / MK 1) The instructions in this guide will show you the procedure for removing and replacing the lock actuator on the Ford Escape. First, open the front doo…
How to open the rear hatch of the Ford Escape from the inside.
How to open the rear hatch of the Ford Escape from the inside.
Ford Escape (2013-2019 / MK 3) In this guide, we will see the instructions that will allow us to open the rear hatch of the Ford Escape from the inside, thus unlocking the closure.…
Replace the Rear Suspension on a Ford Escape MK2
Replace the Rear Suspension on a Ford Escape MK2
Ford Escape (2008-2012 / MK 2) In this video, see the procedure to remove and replace the rear suspension on a second-generation Ford Escape. First, open the trunk and start by rem…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos