Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Factory Radio of the Ford Escape

Model: Ford Escape MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

See other generations:
Video tutorial

Today's instructions will show you how to remove and replace the factory radio with a new multimedia system in the Ford Escape. First, get inside the vehicle and use the appropriate extraction tools to insert into the radio holes, pulling it out; then disconnect the electrical connectors found at the back, as shown in the video.

At this point, install the new multimedia system, making wiring modifications if necessary; then insert and configure the new multimedia system, following the video tutorial to the end!


Updated on 29 August 2026 by ScegliAuto


Related tutorials

How to remove the factory radio of the Ford Escape 2
How to remove the factory radio of the Ford Escape 2
Ford Escape (2008-2012 / MK 2) If you want to disassemble the factory radio inside the cabin of your second-generation Ford Escape on your own, just follow the steps described belo…
How to Remove the Factory Radio from the Ford Escape
How to Remove the Factory Radio from the Ford Escape
Ford Escape (2013-2019 / MK 3) Briefly, you will see the steps to remove and replace the factory radio from the Ford Escape, following the instructions below. First, get inside the…
How to Remove the Factory Radio from a Ford Escape 2
How to Remove the Factory Radio from a Ford Escape 2
Ford Escape (2008-2012 / MK 2) In this video tutorial, you will see how to remove the factory radio from the second generation Ford Escape by following these simple and quick steps…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos