Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster from the Ford Escape - Kuga

Model: Ford Escape MK 3 - Years 2013-2019
Part: Instrument cluster

Today's instructions will show you how to remove and replace the instrument cluster on the Ford Escape dashboard in simple steps. First, get inside the vehicle and start by removing the plastic cover located at the bottom of the dashboard; then pull the instrument cluster to detach it and remove it from the dashboard, disconnecting the electrical connectors found on the back, as shown in the video. At this point, remove and replace the instrument cluster with the new one if necessary, reconnecting it and reassembling the plastic cover!

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Repair the Non-Working Radio of the Ford Escape - Kuga
How to Repair the Non-Working Radio of the Ford Escape - Kuga
Ford Escape (2013-2019 / MK 3) .. the radio of the Ford Escape, as well as the Kuga. First, get inside the vehicle and start removing the radio; to do this, remove the shift knob.. …
How to replace the battery of the Ford Escape - Kuga
How to replace the battery of the Ford Escape - Kuga
Ford Escape (2020-2026 / MK 4) .. the battery of the Ford Escape, as well as the Kuga. First, open the hood of the vehicle and start by removing the plastic cover of the battery, then.. …
How to Remove the Rear Hatch Panel on a Ford Escape
How to Remove the Rear Hatch Panel on a Ford Escape
Ford Escape (2013-2019 / MK 3) Today, you will learn how to remove and replace the rear hatch panel on a Ford Escape. First, open the trunk and start removing the plastic trim piec…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos