Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster in the Ford Escape?

Model: Ford Escape MK 1 - Years 2001-2007
Part: Instrument cluster

As we can see in this tutorial, removing the instrument cluster in the Ford Explorer is a very simple and quick operation. First, disconnect the negative terminal of the battery and wait about 30 minutes. Then, go inside the cabin and, using a 7mm socket wrench, remove the two screws located on the top side of the dashboard. Once this is done, remove the trim and unscrew the additional 4 screws using the same wrench. At this point, you can pull the instrument cluster out of the dashboard, disconnect the rear connector, and install the replacement by following the reverse procedure.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Instrument Cluster from the Ford Escape - Kuga
Removing the Instrument Cluster from the Ford Escape - Kuga
Ford Escape (2013-2019 / MK 3) Today's instructions will show you how to remove and replace the instrument cluster on the Ford Escape dashboard in simple steps. First, get inside t…
How to restore the oil light on the 2015 Ford Escape
How to restore the oil light on the 2015 Ford Escape
Ford Escape (2013-2019 / MK 3) When the oil pressure warning light continues to illuminate on the instrument panel display of your third generation Ford Escape (2015) even after yo…
How to reset the oil light on the Ford Escape
How to reset the oil light on the Ford Escape
Ford Escape (2013-2019 / MK 3) In this new guide of ours, we will describe all the steps you need to follow if you intend to manually reset the engine oil light on the display of t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos