Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument panel in the Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Instrument cluster

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the instrument panel in the Ford Focus, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then locate the plastic cover behind the steering wheel and unclip it. Next, unscrew the two screws indicated using a simple Phillips screwdriver, grip the instrument panel and remove it from the housing.

At this point, all that remains is to disconnect the internal connector and install any replacement following the reverse procedure.


Posted on 25 August 2025 by ScegliAuto


Related tutorials

How to disassemble the instrument panel in the Ford Focus?
How to disassemble the instrument panel in the Ford Focus?
Ford Focus (2011-2018 / MK 3) .. In this tutorial we can see how to disassemble the instrument panel in the Ford Focus, an extremely simple and quick operation. First.. …
How to remove the rear door on the Ford Focus?
How to remove the rear door on the Ford Focus?
Ford Focus (1998-2004 / MK 1) In this tutorial, you will see how to remove the rear door on the Ford Focus, an extremely simple and quick operation. First, open the front door on …
How to Remove the Ignition Cylinder on a Ford Focus?
How to Remove the Ignition Cylinder on a Ford Focus?
Ford Focus (1998-2004 / MK 1) In this tutorial, you will see how to remove the ignition cylinder on a Ford Focus, a very simple and quick operation. To do this, you will need a th…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos