Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the gear knob on a Ford Escape or Kuga

Model: Ford Escape MK 3 - Years 2013-2019
Part: Shift knob

In this video, we see how to replace the gear knob on a Ford Escape (or Kuga) III; the video refers to an automatic car, but the operation is also valid for a manual gearbox: obviously, there will be no electrical connections for the latter. We remove the frame that holds the gear lever boot, disconnect the lighting connector for the gear positions, and then disconnect the gear connector. We lift up the boot and see the two Philips screws that need to be carefully removed, as they are very short. Now we can remove the boot and knob. We detach the boot from the knob shaft by releasing the two spring-loaded tabs. We can find the new knob, for example, on Fruugo with the code 325755997-721139642 at a price of 38.95 euros + 14.49 euros for shipping. Now we put everything back together, reattaching the lever with the boot, then reattaching the two Philips screws with the shaft and reconnecting the connectors. We put the frame back in place and the job is done.

Posted on 17 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford Escape (2013-2019 / MK 3) Let's see in this guide how to repair or reset the radio of the Ford Escape, as well as the Kuga. First, get inside the vehicle and start removing th…
Ford Escape (2020-2026 / MK 4) In this guide, we will see step-by-step instructions on how to disassemble and replace the battery of the Ford Escape, as well as the Kuga. First, op…
Ford Escape (2020-2026 / MK 4) In this video we can see how to remove the central console from the floor of a Ford Escape MK4: Of course, the same procedure is also valid for the E…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos