Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Brake Fluid on a Ford Mondeo MK3

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Brake fluid

In today's tutorial, we will see how to change the brake fluid on a Ford Mondeo third generation, from 2007 to 2014, by following these simple steps. First, open the bonnet and start by removing the old fluid from the reservoir; then remove the front wheel and connect a hose to the brake bleed valve, as shown in the video. At this point, press the brake pedal to bleed the system (otherwise use a pump); then pour in the new brake fluid and let it circulate, closing the valve.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the oil filter on the Ford Mondeo
How to replace the oil filter on the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Replacing the oil filter and engine oil on a Ford Mondeo mk3 model vehicle is a fully achievable operation independently. To carry out this operation…
How to Change the Automatic Gearbox Oil on a Ford Mondeo?
How to Change the Automatic Gearbox Oil on a Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) To change the automatic gearbox oil on a Ford Mondeo, lift the car with a jack or ramp to access the underside of the engine bay. Here, locate the pr…
How to Replace the Oil Filter on a Ford Mondeo
How to Replace the Oil Filter on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) How do you replace the oil filter on a Ford Mondeo? Open and lift the front bonnet to access the oil filter. Using a socket spanner, unscrew the larg…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos