Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Tyre on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Wheel

See other generations:
Video tutorial

In the event of a puncture, observe some precautions for changing the wheel; start by retrieving both the spare wheel and the necessary tools from the designated compartment under the boot floor; before lifting the vehicle, engage a gear and apply the handbrake, then slightly loosen the wheel fastening nuts; next, position the jack at the indicated anchor point on the sill and lift the vehicle enough to complete the wheel removal, fit the spare wheel, tightening the corresponding nuts; once the vehicle is lowered, check the correct tightening of the wheel fastening nuts.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on a Ford Mondeo
Resetting the Tyre Pressure Warning Light on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this short video tutorial, you will see the instructions to reset the tyre pressure warning light on a Ford Mondeo. Before performing any operatio…
How to Reset the Tyre Pressure Light on the Ford Mondeo MK5
How to Reset the Tyre Pressure Light on the Ford Mondeo MK5
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial, you will learn how to reset or clear the tyre pressure light on the Ford Mondeo fifth generation. Before performing this operation,…
How to Reset the Tyre Pressure Sensor on the Ford Mondeo
How to Reset the Tyre Pressure Sensor on the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) Today's main information will show you how to reset the tyre pressure sensor on the Ford Mondeo using a special tool. By turning on the vehicle's ign…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos