Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Ford Mondeo MK5

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Tire pressure warning light

In this tutorial, you will learn how to reset or clear the tyre pressure light on the Ford Mondeo fifth generation. Before performing this operation, ensure all four tyres are inflated to the recommended pressure. Now, get inside the vehicle and start the engine; then press the OK button on the steering wheel as soon as the tyre pressure message appears. Navigate to the menu and settings, and press the OK button again to confirm the reset of the light, as shown in the video!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on a Ford Mondeo
Resetting the Tyre Pressure Warning Light on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this short video tutorial, you will see the instructions to reset the tyre pressure warning light on a Ford Mondeo. Before performing any operatio…
Resetting the Tyre Pressure Warning Light on the Ford Mondeo MK4
Resetting the Tyre Pressure Warning Light on the Ford Mondeo MK4
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial video, you will see how to reset the tyre pressure warning light on the Ford Mondeo fourth series, from 2017; before performing the …
How to Reset the TPMS Light in a Ford Mondeo
How to Reset the TPMS Light in a Ford Mondeo
Ford Mondeo / Fusion (2022-2026 / MK 5) To reset the TPMS light in a Ford Mondeo, bring all tyres to the pressure specified by the manufacturer and turn on the ignition. Use the controls on…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos