Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from the Ford Mondeo

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine

See other generations:
Video tutorial

To remove the engine from the Ford Mondeo, open the bonnet to disconnect all relevant connectors for the sensors located on the engine block. Once the connectors are removed, disconnect all hoses connected to the manifolds, radiator, etc. Then, secure the engine to a hoist and unscrew all bolts fastening the block to the engine mounts on the chassis.

This will allow the engine to be lifted with the hoist, removing it from its housing.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Remove the Common Rail Pump from the Ford Mondeo?
How to Remove the Common Rail Pump from the Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) To remove the common rail pump from the Ford Mondeo, it is advisable to completely remove the engine block from its bay to gain more working space. O…
How do you replace the accessory belt on the Ford Mondeo 2?
How do you replace the accessory belt on the Ford Mondeo 2?
Ford Mondeo / Fusion (2000-2007 / MK 2) The service belt plays a very important role in the car, especially because it is used to recharge the power battery of the same car. Follow the vide…
How to Remove the Battery from a Ford Mondeo
How to Remove the Battery from a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Is the battery on your Ford Mondeo flat and therefore damaged? Here’s how to remove it from the Ford. Open the car door and pull up the engine compar…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos