Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the accessory belt on the Ford Mondeo 2?

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Timing belt

The service belt plays a very important role in the car, especially because it is used to recharge the power battery of the same car. Follow the video uploaded here to understand how the work is done: Open the engine hood and remove the protective panel above it, then lift the right side of the vehicle, remove the wheel, remove the fender and loosen the tensioner, in order to loosen the tension of the aforementioned belt and remove it from its seat. Remembering carefully the path it will have to take between the various pulleys, alternator, air conditioner compressor and whatever else, proceed with its installation and the assembly of all the elements mentioned before.

Posted on 26 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCi
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Today's main instructions will allow us to remove and replace the timing belt on the Ford Mondeo 2.0 TDCi. First, lift the vehicle and begin by disco…
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCI
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) Today's steps will show you the procedure for removing and replacing the timing belt on the Ford Mondeo. First, raise the vehicle and begin by removi…
How to Replace the Timing Belt on the Ford Mondeo
How to Replace the Timing Belt on the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Today, we will explain how to replace the timing belt on the Ford Mondeo mk3 model. Start the replacement by opening the front bonnet and lifting the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos