Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt on a Ford Mondeo MK3

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: V-belt

See other generations:
Video tutorial

In this video, see how to replace the auxiliary belt on a Ford Mondeo MK3: open the bonnet and lift the vehicle, as it is much easier to access the auxiliary belt from underneath. Loosen the tensioner pulley, then remove the belt by sliding it towards you. You can find the belt + tensioner kit on auto-doc.co.uk, for example, with code K046PK1245, priced at £40.87 + £9.95 shipping.

The video shows how to fit the new belt and the routing it should take; normally, when changing the belt, you also change the tensioner. To fit it, pull the belt pulley sideways to insert it easily.

Lower the vehicle and close the bonnet. Job done.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on the Ford Mondeo
How to Replace the Timing Belt on the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Today, we will explain how to replace the timing belt on the Ford Mondeo mk3 model. Start the replacement by opening the front bonnet and lifting the…
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCi
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Today's main instructions will allow us to remove and replace the timing belt on the Ford Mondeo 2.0 TDCi. First, lift the vehicle and begin by disco…
When and How to Replace the Timing Belt on a Ford Mondeo 2.0 TDCI (MK4)
When and How to Replace the Timing Belt on a Ford Mondeo 2.0 TDCI (MK4)
Ford Mondeo / Fusion (2014-2021 / MK 4) This guide provides the necessary instructions on when and how to replace the timing belt on a fourth generation Ford Mondeo with a 2.0 TDCI engine. …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos