Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the driver's seat in the Ford Mondeo?

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Seat

In this tutorial, you will see how to remove the front seat in the Ford Mondeo, a very simple and quick operation. First, ensure the key is not inserted, then move the seat all the way forward, locate the rear bolts of the brackets, and using a Torx T55 spanner, unscrew both. Next, move the seat to the opposite side, locate the remaining two bolts, and unscrew those as well. Now go underneath the seat, disconnect the large connector by unscrewing the corresponding fixing bolt, and remove the seat from the cabin.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Ford Mondeo
How to Reset the Oil Light on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) The procedure to manually reset the oil light on your Ford Mondeo is very simple. Below are the steps to follow. First, get into the car and sit in t…
How to Remove the Sunglasses Compartment from a Ford Mondeo
How to Remove the Sunglasses Compartment from a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Before starting, sit in the driver's seat of your Ford Mondeo. Begin by opening the sunglasses compartment, then unclip the side cover using a thin b…
How to reset the service light on the Ford Mondeo 3
How to reset the service light on the Ford Mondeo 3
Ford Mondeo / Fusion (2007-2014 / MK 3) In the following guide, you will find the description of all the steps you need to take to complete the manual reset procedure for the service light …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos