Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the driveshaft supports of a Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Engine mount

In this video we see how to change the supports of the driveshaft of a camperized Ford Transit: we start by spraying WD-40 on all the bolts, then we go underneath and remove the 18mm bolt in the middle of the rear part, remove the bushing and the splined shaft comes out, then we loosen the two bolts of the support, so we bring down the driveshaft. We then remove the bolts that hold the driveshaft coupled with the gearbox output. The youtuber has decided to do the reassembly work outside and then just put it back on. We can find the piece for example on E-Bay with the code 124314228206 at the price of 45.00 euros each, including shipping costs. In the reassembly it is important to remember the sequences, which can be documented through photos from our smartphone, for safety.

Posted on 11 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Ford Transit?
How do you reset the Service light on the Ford Transit?
Ford Transit (2000-2006 / MK 6) The operation of resetting the Service light that appears on the instrument panel of the Ford Transit involves inserting the ignition key into the co…
How to Replace the Key Battery of a Ford Transit
Ford Transit (2006-2014 / MK 7) Before you begin, you will need a replacement battery for the key. Start by inserting the tip of a flathead screwdriver into the slot on the side of …
How do you replace the battery of the Ford Transit remote control?
How do you replace the battery of the Ford Transit remote control?
Ford Transit (2014-2024 / MK 8) To replace the battery of the Ford Transit remote control, you can press the button located on the top of the device to lift the keychain. Once the k…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos