Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Ford Transit?

Model: Ford Transit MK 6 - Years 2000-2006
Part: Service warning light

The operation of resetting the Service light that appears on the instrument panel of the Ford Transit involves inserting the ignition key into the corresponding slot: once the panel is turned on, you can press both the accelerator and brake pedals at the same time. By continuing to hold them down, you will notice that the Service light on the instrument panel will turn off after a few seconds; at this point, you can release both pedals and also turn off the instrument panel by turning the key in the opposite direction.

Posted on 27 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Ford Transit
How to Reset the Service Light on the Ford Transit
Ford Transit (2006-2014 / MK 7) To reset the Service light on the Ford Transit, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is powered, press…
Resetting the Service Light on the Ford Transit
Resetting the Service Light on the Ford Transit
Ford Transit (2014-2024 / MK 8) This brief guide provides instructions on how to reset the service light for routine maintenance on the Ford Transit. First, get inside the vehicle a…
How to Reset the Service Light on the Ford Transit?
How to Reset the Service Light on the Ford Transit?
Ford Transit (2006-2014 / MK 7) To reset the service light on the Ford Transit, press and hold the brake and accelerator pedals while the ignition is off. With the pedals held down,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos