Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Vacuum Pump

Model: Ford Mondeo / Fusion MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Pump

See other generations:
This video is currently unavailable

The pump that generates the vacuum controlling some actuators is located just below the rocker cover, on the right side when facing the engine bay; to replace it, you must remove the air duct, disconnect the battery, and take off the rocker cover, being careful not to damage the gasket; then disconnect the hoses attached to the pump and unscrew the mounting bolts securing the pump to the cylinder head to remove it from its seat; apply the gasket to the new pump and proceed in reverse for installation.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Checking the Vacuum Pump Operation
Checking the Vacuum Pump Operation
Ford Mondeo / Fusion (1993-2000 / MK 1) To check the correct operation of the brake servo and its associated vacuum pump, you can first perform a simple suction test by disconnecting the ho…
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) Today's guide will show us the information regarding the disassembly and replacement of the timing belt of the Ford Mondeo 2.0 TDCI; the manufacturer…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Ford Mondeo / Fusion (2007-2014 / MK 3) The cabin air filter is located just behind the centre tunnel, and to access it for replacement, you need to remove the glove compartment from the pa…

Other guides you may be interested in

How to Set the Time on an Audi A6

Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the instrument cluster; then press the settings button and navigate to the time option to confirm your choice, as shown in the video. At this point, set the correct time and format, then exit the settings menu to save the changes made; finally, start the engine and ensure that the time has been set correctly!

Watch the video!


by ScegliAuto

More videos