Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Mondeo
  6. : Pump

Ford Mondeo / Fusion - Pump

Pump Ford Mondeo / Fusion (2007-2014 / mk 3)

Ford Mondeo / Fusion (2007-2014 / MK 3)
How to Remove the Fuel Injection Pump on Ford Mondeo 2.0 TDCi

To proceed with the removal of the fuel injection pump on the vehicle, follow the instructions provided below, aided by the images in the video. First, …Read all…
Posted on 18 September 2026 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Replacing the Vacuum Pump

The pump that generates the vacuum controlling some actuators is located just below the rocker cover, on the right side when facing the engine bay; to replace …Read all…
Posted on 26 February 2026 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Checking the Vacuum Pump Operation

To check the correct operation of the brake servo and its associated vacuum pump, you can first perform a simple suction test by disconnecting the hose from …Read all…
Posted on 19 February 2026 by ScegliAuto

Pump Ford Mondeo / Fusion (1993-2000 / mk 1)

Ford Mondeo / Fusion (2007-2014 / MK 3)
How to Remove the Fuel Injection Pump on Ford Mondeo 2.0 TDCi

To proceed with the removal of the fuel injection pump on the vehicle, follow the instructions provided below, aided by the images in the video. First, …Read all…
Posted on 18 September 2026 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Replacing the Vacuum Pump

The pump that generates the vacuum controlling some actuators is located just below the rocker cover, on the right side when facing the engine bay; to replace …Read all…
Posted on 26 February 2026 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Checking the Vacuum Pump Operation

To check the correct operation of the brake servo and its associated vacuum pump, you can first perform a simple suction test by disconnecting the hose from …Read all…
Posted on 19 February 2026 by ScegliAuto

Alternator (1) Antenna (4) Air conditioning (4) Car stereo (11) Battery (8) Control arm (2) Transmission (1) Spark plugs (3) Glow plugs (7) Body (2) Glove compartment (1) Control unit (1) Key (22) Timing belt (16) V-belt (1) Air conditioner (1) Onboard computer (3) Checks and maintenance (20) Dashboard (2) Bearing (5) MAF sensor (1) Brake rotors (2) Headlight (8) Fog lights (1) Air filter (2) Cabin air filter (14) Diesel fuel filter (4) Oil filter (5) Parking brake (3) Grille (1) Fuel injectors (6) Reverse light switch (1) Light bulb (2) Side marker bulb (2) Headlight bulb (11) Antifreeze coolant (1) Instrument panel light (2) License plate light (4) Handle (1) Exhaust muffler (1) Engine (4) Power window motor (2) Starter motor (4) Transmission fluid (1) Brake fluid (2) Engine oil (2) Clock (6) Door trim panel (6) Front bumper (4) Rear bumper (3) Brake pads (9) Tires (1) Shift knob (4) Pump (3) Fuel pump (3) Car door (1) Push button (1) Instrument cluster (3) Radiator (1) Heater core (1) Wheel (1) Fuse box (16) Seat (2) Axle shaft (1) Engine coolant temperature sensor (2) Parking sensors (1) Door lock (1) Suspension system (1) Side mirror (3) Warning light – error code (10) Tire pressure warning light (12) Service warning light (35) Brake drums and shoes (1) Windshield wipers (1) Thermostat (3) Turbocharger (1) EGR valve (6) Steering wheel (2)

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos