Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Injection Pump on Ford Mondeo 2.0 TDCi

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Pump

To proceed with the removal of the fuel injection pump on the vehicle, follow the instructions provided below, aided by the images in the video. First, disconnect the intake connector and remove it from the engine bay. Then, using a 13 mm spanner, unscrew the support nuts of the fuel lines that go from the pump to the injectors and remove them. Disconnect the fuel supply pipe from the pump that comes from the diesel filter. Next, you need to remove the windscreen washer reservoir to gain access and work on removing the pump itself.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump from a Ford Mondeo
How to Remove the Fuel Pump from a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Do you want to replace the fuel pump on your Ford Mondeo and don't know how to remove it? Let's see in the following video where and how to take out …
Replacing the Fuel Filter on a Ford Mondeo 2.0 TDCI
Replacing the Fuel Filter on a Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2014-2021 / MK 4) In this video tutorial, you will learn how to remove and replace the fuel filter on a Ford Mondeo with a 2.0 TDCI engine by following these simple st…
How to Replace the Timing Belt on a Ford Mondeo 2.0 TDCi
How to Replace the Timing Belt on a Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Today, we will go through the steps to remove and replace the timing belt on a Ford Mondeo 2.0 TDCi. First, open the vehicle's bonnet and begin remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos