Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo / Fusion
    4. : How to remove the ignition pump of a Ford Mondeo

Ford Mondeo / Fusion - Video tutorial

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Checks and maintenance
Operation: How to remove the ignition pump of a Ford Mondeo

Do you want to replace the ignition pump of your Ford Mondeo and do not know how to disassemble it? Let's see in the following video where and how to disassemble the pump of our car. We open the engine hood, locate the pump; unscrew the pins as shown in the video (we use a socket wrench with relative bushes). Disconnect the various tubes from the pump and extract it. We insert the new ignition pump and tighten the pins well, connect the various circulation tubes to it. Make sure that you have correctly inserted and mounted the pump in the appropriate housing. We test the operation of the mounted pump.


Posted on 28 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Mondeo 2014-2021 - What problems does the Ford Mondeo 2.0 TDCi with 150 hp present? Read Answer
    • Mondeo 2007-2014 - What problems could the Ford Mondeo TDCi 140 horsepower present? Read Answer
    • Mondeo 2014-2021 - What problems could the Ford Mondeo mk4 2.0 TDCi present? Read Answer
    • Mondeo 2014-2021 - What problems on Ford Mondeo 2.0 tdci? Read Answer
    • Mondeo 2007-2014 - Are there any problems on the Ford Mondeo 2.0 TDCi? Read Answer
    • Mondeo 2000-2007 - What is the location of the external temperature sensor in the Mondeo? Read Answer
    • Mondeo 2007-2014 - How to reset the immobilizer light in the Ford Mondeo? Read Answer
    • Mondeo 2007-2014 - What problems does the 140 bhp Ford Mondeo 2.0 TDCi have? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos