Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Fuel pump

How to replace the fuel pump on a Ford Mondeo? Let's see how to dismantle the tank and the pump inside it. First, lift the car, then remove the fuel tank. Use a socket wrench to undo the securing screws of the cover cap (if present) and take it out of its seat. Use a chisel to undo the large securing nut of the fuel pump, disconnect the power connectors and the liquid circulation tubes. Extract the floating fuel pump from inside the tank. Install a new piece inside the tank, then reassemble all the parts under the car's floor.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the fuel pump of the Ford Mondeo?
How do you replace the fuel pump of the Ford Mondeo?
Ford Mondeo / Fusion (2000-2007 / MK 2) In order to replace the fuel pump of the Ford Mondeo, you need to loosen the screws that secure the rear seat bench: once these screws are loosened, …
How to Remove the Fuel Pump from a Ford Mondeo
How to Remove the Fuel Pump from a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Do you want to replace the fuel pump on your Ford Mondeo and don't know how to remove it? Let's see in the following video where and how to take out …
How to Replace the Diesel Filter of the Ford Mondeo TDCI
How to Replace the Diesel Filter of the Ford Mondeo TDCI
Ford Mondeo / Fusion (2000-2007 / MK 2) Today's guide will show you how to dismantle and replace the diesel filter of the Ford Mondeo TDCI, following the instructions below. First, open the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos