Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fuel Injectors of the Ford Mondeo 2.0 TDCI

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Fuel injectors

In this brief and simple video, you will see how to remove and replace the fuel injectors of the Ford Mondeo with a 2.0 TDCI engine. First, open the bonnet and start by disconnecting the injector rail pipe, undoing the screw with a star screwdriver; then unscrew the fuel injector using a 21 mm socket spanner, as shown in the video. At this point, disconnect the electrical connector to remove and replace the injector with a new one; simply reassemble everything by reversing the disassembly procedure!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Mondeo / Fusion (2000-2007 / MK 2) In today's video, you will see how to remove and replace the diesel injectors on the second series Ford Mondeo with a 2.0 TDCI engine. First, open th…
Ford Mondeo / Fusion (2000-2007 / MK 2) Today's guide will show you how to dismantle and replace the diesel filter of the Ford Mondeo TDCI, following the instructions below. First, open the…
Ford Mondeo / Fusion (2014-2021 / MK 4) Today, we will go through the steps to remove and replace the timing belt on a Ford Mondeo 2.0 TDCi. First, open the vehicle's bonnet and begin remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos