Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Mondeo
  6. : Injectors

Ford Mondeo / Fusion - Injectors

Ford Mondeo / Fusion (2007-2014 / MK 3)
Replacement of diesel injectors for Ford Mondeo 2.0 TDCi.

Today's guide will show us the main steps to disassemble and replace the gasoline injectors of the Ford Mondeo 2.0 TDCi. First, we open the engine hood of our …read all…
Posted on 3 June 2023 by ScegliAuto
Ford Mondeo / Fusion (2007-2014 / MK 3)
How to remove the fuel injectors of the Ford Mondeo 2.0 TDCI

Let's see in this short and simple video how to remove and replace the fuel injectors of the Ford Mondeo, with 2.0 TDCI engine. First we open the engine hood …read all…
Posted on 7 April 2024 by ScegliAuto
Ford Mondeo / Fusion (2000-2007 / MK 2)
Ford Mondei 1.8 TDCi injector replacement

In this video tutorial we will see instructions on how to disassemble and replace the injectors on a Ford Mondeo 1.8 TDCi. First we open and lift the engine …read all…
Posted on 20 March 2024 by ScegliAuto
Ford Mondeo / Fusion (2000-2007 / MK 2)
How to replace the injectors on the Ford Mondeo MK2 2.0 TDCI

In today's video we will see how to remove and replace the diesel injectors on the second series Ford Mondeo, with 2.0 TDCI engine. First we open the engine …read all…
Posted on 24 February 2024 by ScegliAuto
Ford Mondeo / Fusion (2000-2007 / MK 2)
Check the injector return pipe o-ring

Open the front hood, remove the plastic cover on top of the engine and unhook the fuel injectors from the injectors. In the upper part of the injector there is …read all…
Posted on 16 July 2023 by ScegliAuto

Alternator (1) Antenna (4) Air conditioning (4) Car stereo (13) Battery (8) Bushings (1) Arm (2) Gearbox (1) Spark plugs (3) Glow plugs (6) Bodywork (2) Glove box (1) Control unit (1) Key (13) Timing belt (9) V-belt (1) Air conditioning (1) -board computer (2) Checks and maintenance (34) Dashboard (2) Bearing (5) Mass air flow sensor (1) Brake discs (2) Headlight (7) Fog lights (1) Air filter (2) Cabin air filter (14) Diesel filter (4) Oil filter (4) Hand brake (2) Grille (1) Injectors (5) Reverse gear switch (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (10) Dashboard light (2) License plate light (2) Handle (1) Muffler (1) Engine (4) Window motor (2) Starter motor (4) Gear oil (1) Brake oil (2) Engine oil (3) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (9) Tires (1) Gear Shift Knob (3) Pump (3) Fuel pump (2) Door (1) Push button (1) Instrument cluster (8) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (2) Drive shaft (1) Coolant temperature sensor (1) Parking sensors (1) Lock (1) Suspensions (1) Outside rearview mirror (3) Drums and shoes (1) Thermostat (3) Turbine (1) EGR valve (5) Steering wheel (1)

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos