Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo
    4. : Brake rotors

Ford Mondeo / Fusion - Brake rotors

Brake Rotors Ford Mondeo / Fusion (2007-2014 / mk 3)

Ford Mondeo / Fusion (2000-2007 / MK 2)
How to Replace the Rear Brake Disc on a Ford Mondeo
Before you begin, lift the car and remove the rear wheel. Once the wheel is off, start by loosening and removing the bolts that secure the brake pads, then …Read all…
Posted on 8 June 2026 by ScegliAuto
Ford Mondeo / Fusion (2007-2014 / MK 3)
Replacing the Brake Discs and Rear Pads
Lift the vehicle and remove the rear wheel; using a C-clamp, disengage the handbrake cable and continue by removing the brake caliper support, extracting the …Read all…
Posted on 8 February 2026 by ScegliAuto

Brake Rotors Ford Mondeo / Fusion (2000-2007 / mk 2)

Ford Mondeo / Fusion (2000-2007 / MK 2)
How to Replace the Rear Brake Disc on a Ford Mondeo
Before you begin, lift the car and remove the rear wheel. Once the wheel is off, start by loosening and removing the bolts that secure the brake pads, then …Read all…
Posted on 8 June 2026 by ScegliAuto
Ford Mondeo / Fusion (2007-2014 / MK 3)
Replacing the Brake Discs and Rear Pads
Lift the vehicle and remove the rear wheel; using a C-clamp, disengage the handbrake cable and continue by removing the brake caliper support, extracting the …Read all…
Posted on 8 February 2026 by ScegliAuto
Alternator (1) Antenna (4) Air conditioning (4) Car stereo (11) Battery (8) Control arm (2) Transmission (1) Spark plugs (3) Glow plugs (6) Body (2) Glove compartment (1) Control unit (1) Key (22) Timing belt (16) V-belt (1) Air conditioner (1) Onboard computer (3) Checks and maintenance (20) Dashboard (2) Bearing (5) MAF sensor (1) Brake rotors (2) Headlight (8) Fog lights (1) Air filter (2) Cabin air filter (14) Diesel fuel filter (4) Oil filter (5) Parking brake (3) Grille (1) Fuel injectors (6) Reverse light switch (1) Light bulb (2) Side marker bulb (2) Headlight bulb (11) Antifreeze coolant (1) Instrument panel light (2) License plate light (4) Handle (1) Exhaust muffler (1) Engine (4) Power window motor (2) Starter motor (4) Transmission fluid (1) Brake fluid (2) Engine oil (2) Clock (6) Door trim panel (6) Front bumper (4) Rear bumper (3) Brake pads (9) Tires (1) Shift knob (4) Pump (3) Fuel pump (3) Car door (1) Push button (1) Instrument cluster (3) Radiator (1) Heater core (1) Wheel (1) Fuse box (15) Seat (2) Axle shaft (1) Engine coolant temperature sensor (2) Parking sensors (1) Door lock (1) Suspension system (1) Side mirror (3) Warning light – error code (10) (7) Tire pressure warning light (5) Service warning light (35) Brake drums and shoes (1) Thermostat (3) Turbocharger (1) EGR valve (6) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos