Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo
    4. : Brake pads

Ford Mondeo / Fusion - Brake pads

Ford Mondeo / Fusion (2007-2014 / MK 3)
Replacement of the rear brake pads for the Ford Mondeo.
Today we will discover the instructions and procedure that will allow us to disassemble and replace the rear brake pads of the Ford Mondeo, in simple steps. …read all…
Posted on 25 September 2023 by ScegliAuto
Ford Mondeo / Fusion (2014-2021 / MK 4)
Replacement of rear brake pads on Ford Mondeo 4
Loosen the bolts of the affected rear wheel, jack up the car and unscrew them completely so that you can later remove the wheel. Unscrew the two 13 mm rear …read all…
Posted on 21 January 2024 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Ford Mondeo rear brake pads replacement
In today's video tutorial we will see how to remove and replace the rear brake pads of a Ford Mondeo. First we go to remove the rear wheel by unscrewing the …read all…
Posted on 19 December 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Instructions for removing the front brake pads
To be able to remove the front brake pads, place the car on suitable car stands and remove the front wheel in order to access the brake caliper; then release …read all…
Posted on 22 August 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Car brake pads removal
One of the major safety components is the braking system. To avoid the risks of an inefficient braking system, it is necessary to change the brake pads when …read all…
Posted on 14 August 2023 by ScegliAuto
Ford Mondeo / Fusion (2007-2014 / MK 3)
Removal and replacement of brake pads
This video shows us how to remove and replace the front brake pads on our car. First we raise the car with the help of a bridge and remove the alloy wheels to …read all…
Posted on 31 July 2023 by ScegliAuto
Ford Mondeo / Fusion (2007-2014 / MK 3)
Replacement discs and rear pads
Raise the car on a lift and remove the rear wheel. Then disassemble the brake caliper fixing pins, remove the pads and also disassemble the caliper support. …read all…
Posted on 30 July 2023 by ScegliAuto
Ford Mondeo / Fusion (2000-2007 / MK 2)
Replacement of front brake pads
Remove the brake caliper using a ratchet wrench by unscrewing the two rear screws. Remove the caliper support in the same way. Carefully clean the substrate …read all…
Posted on 6 July 2023 by ScegliAuto
Ford Mondeo / Fusion (2000-2007 / MK 2)
Replacing the front brake pads
Unscrew the wheel nuts and lift the car to secure it. Unscrew the bolts and remove the wheel. Check the brake fluid level and make sure it is not at maximum. …read all…
Posted on 24 June 2023 by ScegliAuto
Alternator (1) Antenna (4) Air conditioning (4) Car stereo (13) Battery (8) Bushings (1) Arm (2) Gearbox (1) Spark plugs (3) Glow plugs (6) Bodywork (2) Glove box (1) Control unit (1) Key (13) Timing belt (9) V-belt (1) Air conditioning (1) -board computer (2) Checks and maintenance (34) Dashboard (2) Bearing (5) Mass air flow sensor (1) Brake discs (2) Headlight (7) Fog lights (1) Air filter (2) Cabin air filter (14) Diesel filter (4) Oil filter (4) Hand brake (2) Grille (1) Injectors (5) Reverse gear switch (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (10) Dashboard light (2) License plate light (2) Handle (1) Muffler (1) Engine (4) Window motor (2) Starter motor (4) Gear oil (1) Brake oil (2) Engine oil (3) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (9) Tires (1) Gear Shift Knob (3) Pump (3) Fuel pump (2) Door (1) Push button (1) Instrument cluster (8) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (2) Drive shaft (1) Coolant temperature sensor (1) Parking sensors (1) Lock (1) Suspensions (1) Outside rearview mirror (3) Drums and shoes (1) Thermostat (3) Turbine (1) EGR valve (5) Steering wheel (1)

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos