Removal of Car Brake Pads

Model: Ford Mondeo / Fusion MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Brake pads

See other generations:

This video is currently unavailable

One of the major components for safety is the braking system. To avoid the risks of an inefficient braking system, it is necessary to change the brake pads when they wear out. The following guide shows you how to do this very simply, with a basic knowledge of mechanics.

It is advisable to turn the steering wheel towards the side where the pad needs to be changed, to make the replacement easier. To proceed with the replacement, lift the car with a jack.

You can then remove the wheel and pull the caliper outwards to take the pads out of their housing.

Updated on 14 February 2026 by ScegliAuto

Other guides you may be interested in

Brake Pads - Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

Steering Wheel - Maintenance and repair on other vehicles

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!

by ScegliAuto

Removal of Car Brake Pads

Related tutorials

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

More videos