Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads of the Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Brake pads

Today, let's discover the instructions and procedure to remove and replace the rear brake pads of the Ford Mondeo in simple steps. First, lift the vehicle and begin by removing the rear wheel; then unscrew the bolts securing the brake caliper, detaching it from the disc, as shown in the video. At this point, remove the brake pads and replace them with new ones of the correct type; clean the caliper of any residual dirt before refitting it, and similarly replace the other brake pads on the opposite wheel.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Brake Pads on Ford Mondeo
Replacing Rear Brake Pads on Ford Mondeo
Ford Mondeo / Fusion (1993-2000 / MK 1) In today's tutorial video, you will learn how to remove and replace the rear brake pads on a Ford Mondeo. First, remove the rear wheel by unscrewing …
Replacing Front Brake Pads
Replacing Front Brake Pads
Ford Mondeo / Fusion (2000-2007 / MK 2) Unscrew the wheel nuts and lift the vehicle securely. Remove the bolts and take off the wheel. Check the brake fluid level and ensure it is not at ma…
Replacing Rear Brake Pads on Ford Mondeo 4
Replacing Rear Brake Pads on Ford Mondeo 4
Ford Mondeo / Fusion (2014-2021 / MK 4) Loosen the bolts of the affected rear wheel, lift the car with a jack, and completely unscrew them to remove the wheel. Unscrew the two 13 mm bolts f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos