Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Front Brake Pads

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Brake pads

See other generations:
Video tutorial

Unscrew the wheel nuts and lift the vehicle securely. Remove the bolts and take off the wheel.

Check the brake fluid level and ensure it is not at maximum. Using a ratchet wrench, unscrew the two bolts of the caliper.

Remove the worn brake pads by pulling them out of their seat. Install the new pads, paying attention to the rotation direction stamped on the body.

Reattach the caliper with the two bolts. Refit the wheel.

Recheck the brake fluid level. Reset the position of the pistons by pressing the brake pedal.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Ford Mondeo / Fusion (2007-2014 / MK 3) Today, let's discover the instructions and procedure to remove and replace the rear brake pads of the Ford Mondeo in simple steps. First, lift the ve…
Ford Mondeo / Fusion (1993-2000 / MK 1) In today's tutorial video, you will learn how to remove and replace the rear brake pads on a Ford Mondeo. First, remove the rear wheel by unscrewing …
Ford Mondeo / Fusion (2000-2007 / MK 2) Remove the brake caliper using a ratchet spanner by unscrewing the two rear bolts. Dismantle the caliper bracket in the same way. Clean the bracket t…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos