Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Brake Pads

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Brake pads

See other generations:
Video tutorial

Remove the brake caliper using a ratchet spanner by unscrewing the two rear bolts. Dismantle the caliper bracket in the same way. Clean the bracket thoroughly from any deposits using a deoxidising spray.

Clean the discs before installing the pads to remove any dirt. Apply copper grease around the disc bracket to prevent seizing due to oxidation or rust.

For securing the bracket and caliper, use new bolts if possible; otherwise, clean and lubricate the old ones. Use a wire brush to remove the bulk of the accumulated dirt.

Reposition the piston to its starting position and fit the new pads. Reassemble the caliper and wheel.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Replacing Front Brake Pads
Replacing Front Brake Pads
Ford Mondeo / Fusion (2000-2007 / MK 2) Unscrew the wheel nuts and lift the vehicle securely. Remove the bolts and take off the wheel. Check the brake fluid level and ensure it is not at ma…
Replacing the Rear Brake Pads of the Ford Mondeo
Replacing the Rear Brake Pads of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Today, let's discover the instructions and procedure to remove and replace the rear brake pads of the Ford Mondeo in simple steps. First, lift the ve…
Replacing Rear Brake Pads on Ford Mondeo
Replacing Rear Brake Pads on Ford Mondeo
Ford Mondeo / Fusion (1993-2000 / MK 1) In today's tutorial video, you will learn how to remove and replace the rear brake pads on a Ford Mondeo. First, remove the rear wheel by unscrewing …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos