Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Fuel Filler Neck

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Body

See other generations:
Video tutorial

The following guide shows how to replace the fuel filler neck. You may need to secure any corroded parts in some way, such as the fuel filler neck leading to the tank door.

This operation is not complicated but can become frustrating and requires patience. To perform it, you will need a 1/4 inch ratchet and socket set, along with a flat-head screwdriver.

Open the fuel door and unscrew the filler neck with the ratchet, then use the flat-head screwdriver to detach the fuel neck. There is a clip that secures the rubber hose to the tank, which should be worked by hand.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on a Ford Mondeo 2.0 TDCI
Replacing the Fuel Filter on a Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2014-2021 / MK 4) In this video tutorial, you will learn how to remove and replace the fuel filter on a Ford Mondeo with a 2.0 TDCI engine by following these simple st…
How to Replace the Fuel Pump on a Ford Mondeo
How to Replace the Fuel Pump on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) How to replace the fuel pump on a Ford Mondeo? Let's see how to dismantle the tank and the pump inside it. First, lift the car, then remove the fuel …
How to Remove the Fuel Injection Pump on Ford Mondeo 2.0 TDCi
How to Remove the Fuel Injection Pump on Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2007-2014 / MK 3) To proceed with the removal of the fuel injection pump on the vehicle, follow the instructions provided below, aided by the images in the video. Firs…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos