Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Fluid Replacement

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake fluid

See other generations:
Video tutorial

Brake fluid replacement is part of vehicle maintenance, and performing this operation ensures the brakes operate efficiently. To replace the fluid, lift the vehicle on suitable jack stands and open the reservoir cap. On the side of each brake, there is a valve protected by a plastic cap. Remove the cap and insert a tube into the valve connected to a collection container.

Slightly unscrew the valve and, while pressing the brake pedal, allow the fluid to escape. Close the valve and repeat the same operation on the remaining brakes.

After removing the old fluid, fill the reservoir with the recommended new fluid from the manufacturer. Bleed the brake system using the same procedure used for draining.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Removal of Car Brake Pads
Ford Mondeo / Fusion (1993-2000 / MK 1) One of the major components for safety is the braking system. To avoid the risks of an inefficient braking system, it is necessary to change the brak…
Replacement of Blown Fuse
Replacement of Blown Fuse
Ford Mondeo / Fusion (2000-2007 / MK 2) Fuses are safety devices that protect the electrical system from potential short circuits. When a fuse blows, the causes can vary, but the most likel…
How to Replace the Oil Filter on a Ford Mondeo
How to Replace the Oil Filter on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) How do you replace the oil filter on a Ford Mondeo? Open and lift the front bonnet to access the oil filter. Using a socket spanner, unscrew the larg…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos