Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Blown Fuse

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Fuse box

Fuses are safety devices that protect the electrical system from potential short circuits. When a fuse blows, the causes can vary, but the most likely reason is an overload on the circuit. To check if the overload was temporary, simply replace the blown fuse with another of the same rating. If the new fuse blows again, it indicates a short circuit in the electrical system, in which case intervention is necessary to resolve the fault. If the affected electrical system returns to normal operation, the fuse may have blown due to a temporary overload or 'ageing'. Fuses are located in a box within the engine compartment; the cover of the box indicates the ratings of the fuses, their positions, and which circuits they protect. The replacement is very simple; just pull the old fuse out of its socket and insert the new one, which must be of the same amperage rating.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Mondeo / Fusion (2014-2021 / MK 4) In this video we can see where the fuse boxes are located in the Ford Mondeo and what their respective diagrams are, to consult in case we need to ch…
Ford Mondeo / Fusion (2000-2007 / MK 2) In this video, we can see where the fuse boxes of the Ford Mondeo are located and what their respective diagrams are, useful in case we need to check…
Ford Mondeo / Fusion (2014-2021 / MK 4) In this video, you can see where the fuse boxes are located in the Ford Mondeo and their respective diagrams, useful if you need to check the fuses o…

    Frequently Asked Questions

    • Mondeo 2007-2014 - Where is Ford Mondeo fuse box located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos