Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located just behind the centre tunnel, and to access it for replacement, you need to remove the glove compartment from the passenger side. Open the door and unscrew the screws securing the glove compartment, then pull it out of its housing by disconnecting the courtesy light connectors.

At this point, disengage the bayonet clips of the fuse box cover to lower it and facilitate the filter replacement operations. Remove the cap from the cabin air filter housing, extract the old filter, and insert the new one, ensuring the airflow direction is correct.

Proceed in reverse for reassembly.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on Ford Tourneo Courier and Ford Mondeo
Replacing the Cabin Air Filter on Ford Tourneo Courier and Ford Mondeo
Ford Mondeo / Fusion (1993-2000 / MK 1) In this video, we will replace the cabin air filter located in the engine compartment on the passenger side. Once the front bonnet is safely opened a…
Removing Cabin Air Filter on a Ford Mondeo
Removing Cabin Air Filter on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) How do you remove the cabin air filter? Here’s how to remove the cabin air filter on a Ford Mondeo. Unscrew the fastening screws located on the cover…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Ford Mondeo / Fusion (1993-2000 / MK 1) The cabin air filter is located externally to the cabin and is positioned on the driver's side, just below the windscreen. To replace it, you need to…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos