Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo
    4. : EGR valve

Ford Mondeo / Fusion - EGR valve

Ford Mondeo / Fusion (2000-2007 / MK 2)
How to remove the EGR valve of a Ford Mondeo
Let's see how to remove the EGR valve of a Ford Mondeo. Lift the bonnet and put it in safety, then, with a socket wrench, unscrew the locking pins of the …read all…
Posted on 14 November 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
How to clean an EGR valve on a Ford Mondeo
Let's see in this video how to clean an EGR valve of a Ford Mondeo. Lift the bonnet and put it in safety, then, with a screwdriver, unscrew the locking pins of …read all…
Posted on 10 October 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Egr valve cleaning instructions
The EGR valve has the function of introducing part of the exhaust gases back into the intake: the constant contact with the exhaust gases therefore tends to …read all…
Posted on 18 August 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Check operation of pneumatic EGR valve
The EGR valve has the function of introducing a part of the exhaust gases back into the intake in order to carry out a further combustion of the same and …read all…
Posted on 18 August 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Egr valve cleaning instructions
In the case of the vehicle in question, the removal of the EGR valve is very simple: the valve is located in the rear part of the engine, immediately under the …read all…
Posted on 6 August 2023 by ScegliAuto
Alternator (1) Antenna (4) Air conditioning (4) Car stereo (13) Battery (8) Bushings (1) Arm (2) Gearbox (1) Spark plugs (3) Glow plugs (6) Bodywork (2) Glove box (1) Control unit (1) Key (13) Timing belt (9) V-belt (1) Air conditioning (1) -board computer (2) Checks and maintenance (34) Dashboard (2) Bearing (5) Mass air flow sensor (1) Brake discs (2) Headlight (7) Fog lights (1) Air filter (2) Cabin air filter (14) Diesel filter (4) Oil filter (4) Hand brake (2) Grille (1) Injectors (5) Reverse gear switch (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (10) Dashboard light (2) License plate light (2) Handle (1) Muffler (1) Engine (4) Window motor (2) Starter motor (4) Gear oil (1) Brake oil (2) Engine oil (3) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (9) Tires (1) Gear Shift Knob (3) Pump (3) Fuel pump (2) Door (1) Push button (1) Instrument cluster (8) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (2) Drive shaft (1) Coolant temperature sensor (1) Parking sensors (1) Lock (1) Suspensions (1) Outside rearview mirror (3) Drums and shoes (1) Thermostat (3) Turbine (1) EGR valve (5) Steering wheel (1)

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos