Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Mondeo
  6. : Radiator

Ford Mondeo / Fusion - Radiator

Radiator Ford Mondeo / Fusion (2007-2014 / mk 3)

Ford Mondeo / Fusion (2007-2014 / MK 3)
Disassembly and Replacement of the Cooling Radiator for the Ford Mondeo 2.0 TDCi

In this guide, we will see the main instructions on how to disassemble and replace the engine cooling radiator of the Ford Mondeo 2.0 TDCi. First, open the …Read all…
Posted on 11 February 2026 by ScegliAuto

Alternator (1) Antenna (4) Air conditioning (4) Car stereo (11) Battery (8) Control arm (2) Transmission (1) Spark plugs (3) Glow plugs (7) Body (2) Glove compartment (1) Control unit (1) Key (22) Timing belt (16) V-belt (1) Air conditioner (1) Onboard computer (3) Checks and maintenance (20) Dashboard (2) Bearing (5) MAF sensor (1) Brake rotors (2) Headlight (8) Fog lights (1) Air filter (2) Cabin air filter (14) Diesel fuel filter (4) Oil filter (5) Parking brake (3) Grille (1) Fuel injectors (6) Reverse light switch (1) Light bulb (2) Side marker bulb (2) Headlight bulb (11) Antifreeze coolant (1) Instrument panel light (2) License plate light (4) Handle (1) Exhaust muffler (1) Engine (4) Power window motor (2) Starter motor (4) Transmission fluid (1) Brake fluid (2) Engine oil (2) Clock (6) Door trim panel (6) Front bumper (4) Rear bumper (3) Brake pads (9) Tires (1) Shift knob (4) Pump (3) Fuel pump (3) Car door (1) Push button (1) Instrument cluster (3) Radiator (1) Heater core (1) Wheel (1) Fuse box (16) Seat (2) Axle shaft (1) Engine coolant temperature sensor (2) Parking sensors (1) Door lock (1) Suspension system (1) Side mirror (3) Warning light – error code (10) Tire pressure warning light (12) Service warning light (35) Brake drums and shoes (1) Windshield wipers (1) Thermostat (3) Turbocharger (1) EGR valve (6) Steering wheel (2)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos