Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo
    4. : Bearing

Ford Mondeo / Fusion - Bearing

Ford Mondeo / Fusion (2000-2007 / MK 2)
How to remove the wheel bearing on Ford Mondeo
How to intervene on the disassembly of a wheel bearing on a Ford Mondeo. We place our car on a column bridge, loosen the pins with a telescopic wrench and lift …read all…
Posted on 15 October 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Front hub bearing replacement
When replacing the wheel hub bearing, the first operation to be carried out is to remove the nut in the center of the hub: even before lifting the car, engage …read all…
Posted on 16 August 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Front hub bearing replacement
Before even lifting the car, loosen the central nut that fixes the axle shaft to the hub and the wheel fixing pins; then lift the car by placing it on suitable …read all…
Posted on 13 August 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Replacing the front wheel bearing
Here's how to replace the front wheel bearing on a Ford Mondeo. After applying the handbrake, loosen the hub nut. Jack up the car and unscrew the wheel bolts …read all…
Posted on 6 August 2023 by ScegliAuto
Ford Mondeo / Fusion (1993-2000 / MK 1)
Front hub bearing replacement
Before even lifting the car, unscrew the central nut fixing the drive shaft to the hub; then lift the car by placing it on a stand and complete the disassembly …read all…
Posted on 5 August 2023 by ScegliAuto
Alternator (1) Antenna (4) Air conditioning (4) Car stereo (13) Battery (8) Bushings (1) Arm (2) Gearbox (1) Spark plugs (3) Glow plugs (6) Bodywork (2) Glove box (1) Control unit (1) Key (13) Timing belt (9) V-belt (1) Air conditioning (1) -board computer (2) Checks and maintenance (34) Dashboard (2) Bearing (5) Mass air flow sensor (1) Brake discs (2) Headlight (7) Fog lights (1) Air filter (2) Cabin air filter (14) Diesel filter (4) Oil filter (4) Hand brake (2) Grille (1) Injectors (5) Reverse gear switch (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (10) Dashboard light (2) License plate light (2) Handle (1) Muffler (1) Engine (4) Window motor (2) Starter motor (4) Gear oil (1) Brake oil (2) Engine oil (3) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (9) Tires (1) Gear Shift Knob (3) Pump (3) Fuel pump (2) Door (1) Push button (1) Instrument cluster (8) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (2) Drive shaft (1) Coolant temperature sensor (1) Parking sensors (1) Lock (1) Suspensions (1) Outside rearview mirror (3) Drums and shoes (1) Thermostat (3) Turbine (1) EGR valve (5) Steering wheel (1)

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos