Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wheel Bearing on Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Bearing

Here's how to remove a wheel bearing on a Ford Mondeo. Position the car on a column lift, loosen the bolts with a socket wrench, and raise it to a comfortable height. Undo the bolts and remove the wheel, then start unbolting the brake caliper from its support using a socket. Now remove the caliper support and undo the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car arm and extract the worn bearing. Fit the brake disc with all the associated bolts, secure the caliper support to the disc and the pads, then install the brake caliper, ensuring all bolts are tightened properly. Before fitting the wheel, bleed the brake caliper and tighten the bolt. Finally, remount the wheel onto the wheel hub.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Alternator from Ford Mondeo
Remove Alternator from Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Remove the alternator from a Ford Mondeo? Follow these steps for disassembly. Lift the bonnet and secure it, locate the battery, and disconnect the t…
Replacing the Timing Belt on a Ford Mondeo 2.0 TDCi
Replacing the Timing Belt on a Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Today, we will go through the main instructions for removing and replacing the timing belt on a Ford Mondeo 2.0 TDCi. First, open the bonnet and star…
Replacing the Rear Brake Pads of the Ford Mondeo
Replacing the Rear Brake Pads of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Today, let's discover the instructions and procedure to remove and replace the rear brake pads of the Ford Mondeo in simple steps. First, lift the ve…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos