Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Mondeo
  6. : MAF sensor

Ford Mondeo / Fusion - MAF sensor

MAF Sensor Ford Mondeo / Fusion (1993-2000 / mk 1)

Ford Mondeo / Fusion (1993-2000 / MK 1)
How to Clean the Mass Air Flow Sensor

The mass air flow sensor, commonly known as the MAF sensor, transmits information to the engine management unit regarding the amount of air drawn into the …Read all…
Posted on 29 March 2026 by ScegliAuto

Alternator (1) Antenna (4) Air conditioning (4) Car stereo (11) Battery (8) Control arm (2) Transmission (1) Spark plugs (3) Glow plugs (6) Body (2) Glove compartment (1) Control unit (1) Key (22) Timing belt (16) V-belt (1) Air conditioner (1) Onboard computer (3) Checks and maintenance (20) Dashboard (2) Bearing (5) MAF sensor (1) Brake rotors (2) Headlight (8) Fog lights (1) Air filter (2) Cabin air filter (14) Diesel fuel filter (4) Oil filter (5) Parking brake (3) Grille (1) Fuel injectors (6) Reverse light switch (1) Light bulb (2) Side marker bulb (2) Headlight bulb (11) Antifreeze coolant (1) Instrument panel light (2) License plate light (4) Handle (1) Exhaust muffler (1) Engine (4) Power window motor (2) Starter motor (4) Transmission fluid (1) Brake fluid (2) Engine oil (2) Clock (6) Door trim panel (6) Front bumper (4) Rear bumper (3) Brake pads (9) Tires (1) Shift knob (4) Pump (3) Fuel pump (3) Car door (1) Push button (1) Instrument cluster (3) Radiator (1) Heater core (1) Wheel (1) Fuse box (15) Seat (2) Axle shaft (1) Engine coolant temperature sensor (2) Parking sensors (1) Door lock (1) Suspension system (1) Side mirror (3) Warning light – error code (10) (7) Tire pressure warning light (5) Service warning light (35) Brake drums and shoes (1) Thermostat (3) Turbocharger (1) EGR valve (6) Steering wheel (2)

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos