Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo / Fusion
    4. : How to clean the mass air flow sensor

Ford Mondeo / Fusion - Video tutorial

Model: Ford Mondeo / Fusion MK 1 - Years 1993-2000
Part: Mass air flow sensor
Operation: How to clean the mass air flow sensor

The mass air sensor, better known as mass air flow sensor, has the function of transmitting to the engine management control unit, information relating to the quantity of air sucked in by the engine in function of which the fuel injection is managed; it is clear that incorrect information on the intake air flow significantly affects performance and fuel consumption; therefore keeping the mass air flow sensor clean is absolutely essential: this sensor is easily identifiable and removable, as it is located along the intake duct, connected to the engine air filter box; cleaning can be done with brake cleaner but it is absolutely essential not to touch the filaments with any tools.


Posted on 15 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos