Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Mass Air Flow Sensor on the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: MAF sensor

This guide provides instructions for removing and replacing the mass air flow sensor on the Ford Fiesta. First, open the bonnet of the vehicle and locate the mass air flow sensor, which is positioned on the intake hose near the air filter box; disconnect the electrical connector and unscrew the screws to remove it, as shown in the video. Then, correctly install the new mass air flow sensor, reconnect it, and finally reset any error light using a diagnostic tool.

Posted on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Radiator Fan on a Ford Fiesta
Instructions for Replacing the Radiator Fan on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, you will see the main steps to disassemble and replace the radiator fan on a 2011 Ford Fiesta. First, open and lift the bonnet; the…
How to Replace the MAF Sensor on a Ford Fiesta
How to Replace the MAF Sensor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, open the bonnet of your Ford Fiesta. The MAF sensor is located inside the upper cover of the air filter housing. Begin by relea…
Where is the air pressure sensor located in the Ford Fiesta?
Where is the air pressure sensor located in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, you will see where the air pressure sensor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple a…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos